Breacher you have control

A line of eight Marines sprints towards a house with closed doors and windows, one carries explosives and the others carry various tools used to gain entrance into a building. One holds the blast blanket, a flexible shield used by Marines to protect them from the initial blast and flying debris, others provide security, and two Marines plant the explosives on the door. After an instructor checks the placement and safety of everyone, he hands over control to the lead man in the group yelling out, “Breacher you have control!”

Immediately, a Marine replies, “Roger, I have control! Stand by, five, four, three, two, one!” With an ear-shattering roar, the door and windows erupted into a shower of debris and dirt, which rained down onto the Marines waiting to rush the building.

January 10 was the day Marines waited for. After three days of classes and one day of rehearsals, junior Marines were able to get hands-on training with live explosives at Engineer Training Area 3. The engineers work diligently in preparation to support infantry units for future deployments.

“The combat engineers could be doing this in country, so I felt it was important for them to get the training,” said Sgt. Richard Hill, a native of Mill, Ind., and an acting platoon sergeant with 2nd Combat Engineering Battalion. “The training went well. These guys put in a lot of class time and rehearsal time. They learned the materials and were able to put that knowledge to work.”

Marines started with the basics; manufactured explosives, and then they moved on to expedient explosives, and urban breaching.

The main focus for Marines after getting down all the basics was learning how to use what’s around them for explosive charges, said Cpl. Rollie Lemons, of Austin, Texas, and a sapper instructor with 2nd CEB.

“These Marines get out what they put in,” said Lemons “We’re here to teach and provide safety and guidelines. Your own imagination is your own limitation.”

The expedient portion of the range consisted of makeshift explosives made from material that could be found in a combat environment.

Two of the charges used during the expedient portion were the “Grape Shot” a directional charge made with an ammo can containing C-4 explosive on the bottom and shrapnel on the top and a “Frankenstein,” which is a multi-directional shot made up of a roll of barbed wire with TNT in the middle of it on a timer blasting cap.

After, Marines went on to the urban breaching portion, where they were able to learn the basics for blasting an entrance through doors, windows and even walls.

All of these operations take just a few hundredths of a second and occur so smoothly and quickly that they can hardly be felt or heard. Active engine bearings, another high-end solution from Audi, use out-of-phase counter-oscillations to compensate for the slight vibrations that occur during four-cylinder operation. The COD technology reduces NEDC fuel consumption by roughly five percent, and even greater savings of approximately 10 percent are possible when driving at moderate speeds.

The standard eight-speed tiptronic is specially tuned to the sporty character of the Audi RS 7 Sportback. Drivers can choose between the modes D and S or change gears themselves using the shift paddles on the steering wheel or the selector lever, which sports a unique RS design. While the lower gears of the tiptronic are closely spaced for sporty response, eighth gear is tall like an overdrive to reduce fuel consumption.

The Audi RS 7 Sportback comes standard with quattro permanent all-wheel drive for its decisive advantage in traction and driving safety compared with its two-wheel-drive competitors. At the heart of the quattro system is a centre differential with a high locking rate and a separate oil cooler to regulate its temperature. It distributes the power as needed within a wide range between the front and rear axles. In the standard configuration, 60 percent flows to the rear and 40 percent to the front.

An intelligent software solution called torque vectoring supports the work of the differential at the cornering limit with minimal braking of the wheels that are under a reduced load. Audi also offers the optional sport differential for the rear axle, which uses two superposition gears to actively distribute the power between the wheels.

The Audi RS 7 Sportback comes standard with polished, 20-inch forged lightweight wheels in a seven twin-spoke design. The five-door high-performance coupe also rolls on optional 21-inch cast wheels in a choice of three designs.

Powerful brakes are located behind the large wheels. The four internally vented discs feature a weight-saving wave design and measure 390 millimetres in diameter up front. Pins decouple the steel friction rings from the aluminium brake caps. Black painted six-piston calipers – optionally available in red – grip the discs. Audi also offers optional 420 millimetre carbon-fibre ceramic discs with anthracite grey calipers. The electronic stabilisation control (ESC) has a Sport mode and can also be deactivated entirely.

Equipped with the air suspension, which harmonises perfectly with the dynamic character of a sport coupe, the new RS 7 Sportback is sporty, yet still comfortable. The RS 7 adaptive air suspension lowers the body by 20 millimetres. Adaptive damping, another of the system’s features, adjusts the suspension’s response to the condition of the road, the driver’s style and the mode selected in the Audi drive select system, with which the driver can alter the function of key components in multiple steps.

Audi offers the taut sport suspension plus with dynamic ride control (DRC) as an alternative to the air suspension. It uses steel springs and three-stage adjustable dampers that are connected to one another via diagonal oil lines and a central valve. Another option, which can also be integrated into Audi drive select, is the dynamic steering with its steplessly variable steering boost and ratio. As with the standard electromechanical steering, its characteristics are specially tailored for the RS 7 Sportback.